Peugeot 2008 Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
107 Posts
Discussion Starter · #1 ·
I don't know the technical term for these but I noticed on my side rear seat belts that they do not have those little round plastic stoppers that prevent the clip from sliding all the way down to the bottom like the front seat belts have. Every car I have ever owned or sat in has these on every seat belt as I thought its a standard design requirement.

<img src="uploads/51/image.jpg" />Edited by: jlmadd
 

·
Registered
Joined
·
193 Posts
No not silly, mine does not have them fitted, the clip just sits on the wheel arch trim. Strange lack of detail when the rest of the car is good. Probably just down to the spec of the seat belts.That reminds me, must book mine in for the rear seat belt recall. Not had that completed yet and it was this post that reminded me I had the letter.

Mac
 

·
Registered
Joined
·
107 Posts
Discussion Starter · #3 ·
Oh ok, just a poor design then. Have seen you can buy them but unsure whether it will effect the belt if installed after factory.
 
1 - 3 of 3 Posts
Top