Peugeot 2008 Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
27 Posts
Discussion Starter #1
There is another post of this type, but I decided to start a new one to avoid the confusion that arises after many responses
455
456
457


materials
2 x neck lanyards, (office supply shop), 2 x self adhesive cable tie things (auto parts). Total cost about $10 Aus
Only drilling needed into the shelf itself.
The parcel shelf can be removed easily by releasing the plastic clips on the lanyard.
I cut the lanyard to length.
458
459
460
Haven't tidied up the knot below the shelf yet. I'll put some epoxy glue on the knot to stop it unravelling, and cut off all the protruding bits

I hope the photos are all there and in the appropriate order. Not sure how this web site treats these images. I'm sure you'll get the picture..........you've seen IKEA instructions before.....
I could have moved the top mounts more to the outside but wasn't sure of the adhesion in the curved sections of the window frame. Never mind, in my next incarnation i'll improve it.
 
1 - 3 of 3 Posts
Top