Peugeot 2008 Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hi, my partners drive belt snapped so I bought the specified belt and changed it over. Whilst doing so I noticed another pulley at the back of all the others towards the top of the engine. I am assuming this is the water pump pulley. Does anyone know if I need another belt for this as the one that I have is not long enough to go over it.
The car is a 2013 with 1.2vti petrol engine.
 

·
Registered
Joined
·
441 Posts
I can't say for sure, as I'm not an expert and don't have all your cars details
but
It would appear there is one belt that drives the alternator and air-con (if you have air-con)
and a seperate belt that does the waterpump
your motor factor or wherever you got the first belt should be able to tell you
here is what I've found - (might not be your engine) DON'T accept the numbers

waterpump

alternator - no aircon

alternator with aircon
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #3 ·
I can't say for sure, as I'm not an expert and don't have all your cars details
but
It would appear there is one belt that drives the alternator and air-con (if you have air-con)
and a seperate belt that does the waterpump
your motor factor or wherever you got the first belt should be able to tell you
here is what I've found - (might not be your engine) DON'T accept the numbers

waterpump

alternator - no aircon

alternator with aircon
Thank you, this is the same belt that I have managed to find so I'll give it a go.
Strangely it's not listed at any of the usual suppliers
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top