Reverse light don't work Peugeot 2008 2014

vlado85 · Jan 25, 2018

Hello guys,

20 days ago I bought a used Peugeot 2008 eHDI 1.6 92hp from 2014.

I am very satisfied with the car, however, I have one problem.
Do not do me a reverse light!?
Does not the car have a white backlight signal?
How will someone know that I'm going to reverse?

https://preview.ibb.co/cd99db/rear_lamps.jpg

Now I checked in the manual and saw that there is only one reverse light!
Is it possible that this space next to the direction indicators on the back is not foreseen for reverse light?

I checked this light too, and it's absolutely dark when I go back.
Foog lamp also dont work.
Is this light on the sensor or?

Which bulbs are going and how they change?
There is a possibility that the fuse has gone.

Vladimir

Edited by: vlado85

burty · Jan 25, 2018

The reverse light is the left hand light under the rear bumper. The fog light is the right hand one. The reversing light is not very bright. Yes it is peculiar that the reversing light is not the spare space in the light cluster. In think a few owners did modify their lights to make that the case.

allan40alt · Jan 27, 2018

You may find this thread of interest:

http://www.2008ownersclub.co.uk/forum/topic1748.html

vlado85 · Jan 27, 2018

Hi,

Yes I seen these topics, however, I do not have the knowledge, not have time to do it.

I've changed both bulbs for reverse and fog rear light and don

't

work.

I did not manage to find out if these lights had a fuse?
What else could be a problem?

Edited by: vlado85

allan40alt · Jan 27, 2018

It could be a blown bulb and you may find this thread of interest as you may wish to replace the poor bulb light with a brighter and whiter LED.

http://www.2008ownersclub.co.uk/forum/reverse-rear-fog-light-to-leds_topic206.html

Al.

PS: Page 7 shows some photos of the results I got with a slightly better LED.

PPS: ...and page 12 shows how to get to them for replacement.

.

<!--if gte mso 9>
<w:Word>
<w:View>Normal</w:View>
<w:Zoom>0</w:Zoom>
<w:TrackMoves/>
<w:Trackatting/>
<w

unctuationKerning/>
<w:ValidateAgainstSchemas/>
<w:SaveIfInvalid>false</w:SaveIfInvalid>
<w:IgnoreMixed>false</w:IgnoreMixed>
<w:AlwaysShowPlaceholderText>false</w:AlwaysShowPlaceholderText>
<w

onotPromoteQF/>
<w:LidThemeOther>EN-GB</w:LidThemeOther>
<w:LidThemeAsian>X-NONE</w:LidThemeAsian>
<w:LidThemeComplex>X-NONE</w:LidThemeComplex>
<w:Compatibility>
<w:BreakWrappedTables/>
<w:SnapToGridInCell/>
<w:WrapTextWithPunct/>
<w:UseAsianBreakRules/>
<w

ontGrowAutofit/>
<w:SplitPgBreakAndark/>
<w:EnableKerning/>
<w

ontFlipMirrorIndents/>
<w:OverrideTableStyleHps/>
<w:UseFELayout/>
</w:Compatibility>
<m:mathPr>
<m:mathFont m:val="Cambria Math"/>
<m:brkBin m:val="before"/>
<m:brkBinSub m:val="--"/>
<m:smallFrac m:val="off"/>
<m:dispDef/>
<m:lMargin m:val="0"/>
<m:rMargin m:val="0"/>
<m:defJc m:val="centerGroup"/>
<m:wrapIndent m:val="1440"/>
<m:intLim m:val="subSup"/>
<m:naryLim m:val="undOvr"/>
</m:mathPr></w:Word>


Edited by: allan40alt

allan40alt · Jan 27, 2018

I've just found this alternative method to improve the reversing light that you may find of interest:

http://www.2008ownersclub.co.uk/forum/reversing-light_topic966_post9960.html?KW=#9960

Al.

<!--if gte mso 9>
<w:Word>
<w:View>Normal</w:View>
<w:Zoom>0</w:Zoom>
<w:TrackMoves/>
<w:Trackatting/>
<w

unctuationKerning/>
<w:ValidateAgainstSchemas/>
<w:SaveIfInvalid>false</w:SaveIfInvalid>
<w:IgnoreMixed>false</w:IgnoreMixed>
<w:AlwaysShowPlaceholderText>false</w:AlwaysShowPlaceholderText>
<w

onotPromoteQF/>
<w:LidThemeOther>EN-GB</w:LidThemeOther>
<w:LidThemeAsian>X-NONE</w:LidThemeAsian>
<w:LidThemeComplex>X-NONE</w:LidThemeComplex>
<w:Compatibility>
<w:BreakWrappedTables/>
<w:SnapToGridInCell/>
<w:WrapTextWithPunct/>
<w:UseAsianBreakRules/>
<w

ontGrowAutofit/>
<w:SplitPgBreakAndark/>
<w:EnableKerning/>
<w

ontFlipMirrorIndents/>
<w:OverrideTableStyleHps/>
<w:UseFELayout/>
</w:Compatibility>
<m:mathPr>
<m:mathFont m:val="Cambria Math"/>
<m:brkBin m:val="before"/>
<m:brkBinSub m:val="--"/>
<m:smallFrac m:val="off"/>
<m:dispDef/>
<m:lMargin m:val="0"/>
<m:rMargin m:val="0"/>
<m:defJc m:val="centerGroup"/>
<m:wrapIndent m:val="1440"/>
<m:intLim m:val="subSup"/>
<m:naryLim m:val="undOvr"/>
</m:mathPr></w:Word>

vlado85 · Jan 27, 2018

allan40alt said:
It could be a blown

I'm trying to fix the rear fog and reverse lamp, I do not want to change it.
I put new bulbs

and don't work.

vlado85 · Jan 29, 2018

Hi,

It is interesting that the car board does not signal that a bulb does not work.
Car did not even show me anything when the lights that illuminated the number plate burned down
.

Does Peugeot have a warning for that?

It also does not show a error on

diagnostic computer

.

The board
correctly shows that the rear fog lamp is on, which means that the fuse
has not gone,

but there may have been some interruptions to the fog lamp and reversing lamp.

There is no need to look at the gearbox reverse switch when rear fog lamp

does not work

.

Where is the installation

to a rear fog and a reverse lamp and where could an interruption occur?

Edited by: vlado85

vlado85 · Feb 9, 2018

Hello guys,

my servicer found the problem!
After
reviewing the installation and testing electrical conductivity, he
found that the problem was a connector that was not well-integrated and
of poor quality.
So now the lamps working without problems.

Fixerman · Feb 9, 2018

vlado85 said:
Hello guys,

my servicer found the problem! After
reviewing the installation and testing electrical conductivity, he
found that the problem was a connector that was not well-integrated and
of poor quality. So now the lamps working without problems.

Good news indeed.

Reverse light don't work Peugeot 2008 2014

Top Contributors this Month

Recommended Communities